Fire Classification
Fires behave differently depending on what is burning. The module explains the types of combustible materials, fire characteristics and extinguisher selection, followed by a short fire-classification quiz.
VR All-in-One Safety Training Module Catalogue
All safety training modules available for VR all-in-one headsets, organised into 15 safety topics. Filter by topic or search by accident type or work scenario, for example “forklift”, “electric shock” or “scaffold”.
- Modules
- 99
- Topics
- 15
VR all-in-one headsets run standalone without a PC. Modules are licensed in the combination you need; the modules, quantity and price delivered are confirmed in your quotation.
All categories · 99 modules
Fire Safety
12 modulesCommon Fire Extinguishers
Extinguishers differ by the agent they contain. The module covers how each type works, how to use it and which fires it suits, followed by a short extinguisher quiz.
School Fire Evacuation
After a fire breaks out at school, trainees must choose the right way out to stop the fire spreading and avoid injury. Steps include reading fire signs, cutting the power, using an extinguisher, testing door temperature before choosing a route, calling the fire service and covering the nose and mouth with a wet towel.
Shopping Mall Fire Evacuation
After a fire breaks out in a mall, trainees must escape correctly to stop the fire spreading and avoid injury, including covering the nose and mouth with a wet towel, calling the fire service, using the escape route and using an extinguisher.
Metro Fire Evacuation
After a fire breaks out on the metro, trainees must escape correctly, including opening the emergency exit door, pressing the alarm, keeping away from the explosion zone, using an extinguisher, avoiding lifts and using the escape route.
High-Rise Residential Fire Evacuation
After a fire breaks out in a high-rise building, trainees must escape correctly, including covering the nose and mouth with a wet towel, calling the fire service, using the escape route, sealing door gaps with tape and using a light source to attract rescuers.
School Bus Fire Evacuation
After a school bus catches fire, trainees must escape correctly, including staying low to avoid smoke, breaking a window with an emergency hammer and leaving the vehicle.
Kitchen Fire Prevention at Home
After a kitchen fire starts at home, trainees must respond correctly to stop it spreading, including the right action for a pan fire and calling the fire service.
Tunnel Fire
During gas cutting, a co-worker drops a hot rebar offcut onto the waterproof membrane and starts a fire. The worker must choose between fleeing in panic and putting the fire out with an extinguisher.
Hot-Work Fire
Before welding, workers must follow the hot-work procedure: obtain a hot-work permit, place an extinguisher, assign a fire watch and remove ignition hazards. Welding without identifying these hazards leads to a fire on site.
Vehicle Self-Ignition
On a hot day, a street sweeper sets off without a safety inspection. Strong sunlight overheats the cab, the fuel tank ignites and the fire damages the vehicle and burns the crew.
Dormitory Fire
With poor safety training, a worker carelessly drops a cigarette in the dormitory and the bedding catches fire. Panic and low awareness let the fire spread, causing serious losses and injuries.
Falls from Height
9 modulesFall Through a Corroded Walkway
A worker walks onto a corroded platform walkway without noticing or going around it and falls to his death.
Fall from a Vertical Ladder
A worker climbs a vertical ladder without keeping three points of contact or using a fall arrester, slips and falls to his death.
Fall at a Material Loading Opening
During a lunch break, a worker leans against the edge of a loading platform where the protective gate has not yet been installed and falls from height.
Fall While Working on a Tiled Roof
Without a safety walkway or lifeline in place, a worker walks across roof tiles against the rules and falls to his death.
Safety Harness Use
A safety harness is the last line of defence when working at height. The module explains why and how to wear a harness correctly (with video) and then tests the trainee on putting it on.
Fall Through a Lift Shaft Opening
At a lift shaft opening with no protective door or guardrail, a worker carries on without fall protection, loses his footing and falls through the opening.
Mobile Platform Tip-Over
While hanging safety banners in a metro tunnel from a mobile work platform, workers skip a proper inspection and fail to remove a hazard, and the platform tips over.
Fall While Cleaning a Crane Runway
While cleaning dust from an overhead crane runway, a worker ignores fall-protection rules, loses his footing on the narrow walkway and falls.
Fall While Climbing with a Load
Installing roof vents on a warehouse, a worker climbs a straight ladder one-handed while carrying a large item instead of keeping three points of contact, and falls.
Vehicle Hazards
16 modulesExcavator Operation
During excavation, the banksman fails to direct the excavator as required, a worker enters its working radius and is struck by the bucket as the machine slews.
Runaway Truck on a Slope
At an excavation site, a driver queuing to haul spoil gets out to chat without applying the handbrake, and the truck rolls down the slope.
Overloaded Dump Truck
An excavator overloads a dump truck and the driver carries on regardless. At a junction, the extra momentum makes the truck lose control and overturn, killing four workers at the crossing.
Damaged Road Surface
A worker drives a maintenance vehicle to inspect a badly damaged road, ignores the warning to drive carefully, loses control and causes a multi-vehicle collision.
Traffic Control Setup
In heavy fog, road workers park to start work without placing warning signs and other traffic control, and passing traffic hits the work vehicle.
Street Sweeper Pre-Use Check
On a hot day, a street sweeper sets off without a safety inspection. Strong sunlight overheats the cab, the fuel tank ignites and the fire damages the vehicle and burns the crew.
Speeding Tunnel Battery Locomotive
A battery locomotive in a tunnel neither sounds its horn nor keeps to the 5 km/h limit, cannot brake in time and injures two workers.
Racing a Train at a Level Crossing
An overloaded truck descending towards a level crossing cannot slow down or brake properly and collides with a passing train.
Speeding in the Plant Area
A driver fails to slow down at a pedestrian crossing inside the plant, causing an accident.
Crossing the Train Depot Track
A maintenance worker crosses the running track to check parked trains without following the stop–look–cross rule and is hit by a train leaving the maintenance shed.
Rail Vehicle Strikes Workers
Workers are on the track at a dimly lit sharp bend with no stop sign or lookout ahead of the work area, and a rail vehicle runs into them.
Forklift Reversing Alarm Failure
With its reversing alarm not working, a forklift backs into a person on site who is looking at a phone.
Forklift Forward Tip-Over
A forklift carrying an overweight load keeps going down a slope, brakes hard when a pedestrian appears and tips forward under the load's momentum.
Forklift Side Roll-Over
A forklift speeding in the workshop brakes sharply in a turn to avoid a pedestrian and rolls over sideways.
Forklift Strikes a Pedestrian
With the load blocking the view, a forklift speeds through a junction without stopping to look and fatally strikes a colleague crossing.
Forklift Knocks Down a Rack
Taking a shortcut through a narrow aisle at speed, a forklift with an oversized load hits a storage rack and brings it down.
Struck-by Objects
4 modulesSafety Helmet Use
Wearing a safety helmet correctly is key to protecting workers. The module explains why and how to wear a helmet properly (with video) and then tests the trainee on wearing it.
Falling Object from a Tower Crane
During a tower crane lift, a worker without a helmet stays out of the safe area and is hit by an object falling from the load platform.
Falling Tool from a Suspended Platform
Working on a suspended platform, workers throw tools to each other out of habit; a tool falls and strikes a passing co-worker.
Roadside Lawn Maintenance
A worker mowing a roadside lawn without proper PPE is hit on the head by a stone thrown up by the mower.
Lifting Operations
7 modulesWire Rope Inspection
Wire rope quality is critical to lifting safety. The module explains how to judge rope condition and discard criteria with illustrated examples, then tests the trainee's ability to identify defects.
Mobile Crane Overturn
On a metro construction site, a mobile crane lifts the head of a tunnel boring machine that exceeds its rated load; the operator forces the lift and the crane topples.
Vertical Hoisting Injury
A worker stays inside the tower crane's working radius instead of moving to the safe area and is struck by a falling load platform from a crane that was not inspected before use.
Side Pulling with an Overhead Crane
While a wheel is being changed, the hook is not directly above the load; when lifting starts the wheel swings and strikes the worker.
Ten Lifting Prohibitions (Part 1)
Recreates lifting accidents caused by breaking the 'ten do-not-lift' rules, such as unclear or improper signals, overloads and people or loose items on the load.
Ten Lifting Prohibitions (Part 2)
Continues the 'ten do-not-lift' scenarios, such as unclear or improper signals, overloads and people or loose items on the load.
Overhead Crane Accident
The slinger and crane operator fail to check the sling and lifting path; the sling snags a steel section, which topples and crushes the slinger against a roller.
Collapse Hazards
11 modulesExcavation Collapse
As the excavation gets deeper, the shoring is not reinforced in time and the pit collapses, causing a serious accident.
Tower Crane Hazards
In winds above force 6, a worker operates the tower crane anyway; the mast becomes unstable and collapses, causing serious damage and casualties.
Masonry Wall Collapse
Building an interior wall, workers do not stop when a single lift exceeds 1.8 m; the wall loses stability and collapses.
Slope Excavation Collapse
The excavator operator undercuts the slope against the rules; the uneven load at the pit edge overturns the excavator and injures workers.
Cross Passage Collapse
Workers ignore water seepage in a tunnel cross passage and carry on by experience, triggering a mud and water inrush that collapses the tunnel.
Formwork Support Collapse
Workers erect formwork supports without following the procedure and the support system becomes unstable and collapses.
Mud and Water Inrush
While clearing spoil under the tunnel trolley, mud and water burst in at the shield tail; workers who fail to reach safety are buried or struck by tunnel segments.
External Scaffold Collapse
Scaffolders erect a scaffold with tubes spaced too far apart and too few, discontinuous cross braces, and it collapses.
Tunnel Face Collapse
During cutter changes in the chamber, workers overlook mud and water at the tunnel face, and the ground collapses into the chamber, causing casualties.
Transmission Tower Break
While slackening conductors, the temporary ground anchor in a wet, waterlogged pit pulls out; the tower is loaded unevenly and snaps.
Overhead Line Tower Collapse
Erecting a tower with the wrong size anchor nuts leaves the anchor bolts under-tightened, and the tower falls while the conductors are tensioned.
Machinery Hazards
6 modulesConstruction Hoist Failure
At the end of a shift, two workers force their way onto an already overloaded construction hoist; with the overload protection failed, the hoist falls.
Caught in Rotating Equipment
Noticing slow material flow, an operator opens the mixer guard without stopping the machine and reaches in to clear a blockage, losing fingers.
Crushed by an Equipment Door
An operator reaches into a running machine to retrieve a dropped item and the closing door comes down and breaks his arm.
Struck by a Moving Machine Part
When a robotic arm triggers an alarm, an operator climbs over the guardrail to fix it without stopping the machine and is struck on the head.
Abrasive Wheel Injury
Cutting rebar without a test run or safety check, the operator misses a crack in the abrasive disc; the disc shatters and severs his fingers.
Caught by Loose Clothing
Breaking up a temporary road surface on a hot day, a worker in loose clothing gets it caught in the air compressor and is dragged to the ground.
Electric Shock
5 modulesElectrocution in a Rebar Workshop
After a sudden power failure in the rebar workshop, a worker opens the distribution box himself instead of calling an electrician and is electrocuted.
Electric Shock from a Work Light
As the wall gets higher, a bricklayer moves a portable halogen work light himself; its casing is live and he is electrocuted.
Submersible Pump Electric Shock
After heavy rain, a worker puts a submersible pump into a waterlogged pit without checking it; damaged insulation energises the pump and water, causing electric shock.
Substation Electric Shock
During disconnector maintenance at a substation, a worker removes the line-side terminal without authorisation, losing earthing protection, and receives an induced-voltage shock.
High-Voltage Electric Shock
Inspecting a faulty vehicle, a maintenance worker skips the earthing rod and voltage tester, touches a high-voltage line on the roof and is killed.
Poisoning & Asphyxiation
4 modulesManual Bored Pile Hazard
Before working in a hand-dug pile shaft, a worker skips ventilation and gas testing, climbs down a rope ladder, is overcome by carbon monoxide and falls to the bottom.
Gas Leak Poisoning
A poorly checked U-type water seal lets coal gas leak, and the inspector is fatally poisoned.
Gas Poisoning in a Metro Tunnel
While installing tunnel segments, workers ignore the gas alarm instead of protecting themselves and stopping work, and collapse from poisoning.
Gas Poisoning in a Road Tunnel
A hot rebar offcut from gas cutting ignites a drainage pipe; the fire gives off toxic smoke and a worker who rushes in to fight it dies of poisoning.
Explosion Hazards
4 modulesGas Welding Explosion
During welding on site, workers do not keep the required distance between oxygen and acetylene cylinders, leading to an explosion with casualties.
Tunnel Blasting Accident
Clearing debris from a recently blasted area without a thorough check, a drill hits an unexploded charge, which detonates.
Explosion from Water at the Converter Platform
At a steel plant, the charging crew does not check slag at the vessel mouths or that the platform and slag channel are dry; molten iron spills onto standing water and explodes.
Sealed Container Explosion in a Converter
Before loading the scrap chute, the crew does not check for sealed containers, wet or oily materials; a sealed container goes into the converter with the scrap and explodes.
Hazardous Chemical Leaks
2 modulesSodium Hydroxide Splash: Self-Rescue and Response
Trains the full response after sodium hydroxide splashes into the eyes and face while removing a filter: calling for help, flushing, isolating the source, cordoning off and getting medical care.
Chemical Leak at Tool Vendor Equipment: Evacuation and Restart
Simulates emergency evacuation, muster and headcount after a chemical leak in a cleanroom, and protective checks before restart, stressing that no one re-enters without approval.
Equipment Misoperation & Property Damage
8 modulesAccidental EMO or Light Curtain Trigger
Shows how backpacks, tools, elbows or ladders touch the EMO button or break a light curtain in tight spaces, shutting down equipment, and how to prevent it.
Scaffold Strikes Wall Fixtures
Recreates a mobile scaffold hitting cameras, speakers and an emergency kit while being moved along a corridor, reinforcing guidance, bump protection and route checks.
Scaffold Strikes Vehicles, STB or Smoke Curtain
Shows the collision risk with overhead vehicles, STB units and smoke curtains when guardrails are not lowered, height is not checked or the route drifts.
Sprinkler Strike Causes Water Damage
While working on the track from a scaffold, a tool or body part hits a sprinkler head, releasing water that damages equipment below.
Load Port Dust Cover Hits a Wafer Pod
Recreates the chain of events when a temporary dust cover at the load port is not removed and, after the reflector is taken down, a descending wafer pod hits it.
Pole Hits a Wafer Pod While Retrieving a Reflector
Shows a worker bending to pick up a fallen reflector, losing grip of the pole, which slides into the tool and the FOUP, stressing correct pole handling.
Items Left on the Track Hit a Vehicle
Simulates tools left above the track after work and vehicles released without a re-check, so the vehicle hits the items and is damaged.
Incorrect STB Installation Causes a Collision
Covers releasing vehicles before confirming STB orientation and interference checks, reinforcing pre-release verification and supervision duties.
Work at Height & Floor Openings
2 modulesWorker Fall Risk on a Scaffold
A worker stands on stacked boards inside the scaffold, leans out, loses balance and is left hanging by the harness, a warning about posture and footing at height.
Tool Falls Through a Raised Floor Opening
Scissors left at the edge of a floor opening are knocked in as the worker climbs out and fall to the level below, reinforcing protection at openings.
Electrical & Power Tool Work
2 modulesBreaker Short Circuit in an HID Panel
Prying a breaker cover with a screwdriver on a live panel causes a short-circuit arc, stressing certification, isolation and correct procedure.
Hand Caught While Drilling
A connecting plate is not clamped in a vice and a colleague holds it by hand during drilling; the part spins and catches his hand.
Other Topics
7 modulesSafety Sign Recognition
Learn to recognise safety signs, understand what they mean and where they apply. Trainees place the correct signs in four different work environments.
Construction Hazard Spotting
Hazards drawn at random from a hazard library are placed in a large site environment; trainees mark and clear them, and the score depends on how many they find.
Waste Sorting
A full waste-sorting environment in which trainees score points by sorting 20 different kinds of waste correctly.
Earthquake Evacuation
During an earthquake at school, trainees must respond correctly: take cover, keep away from windows and the centre of the classroom, protect the head with a bag and avoid broken power lines.
Drug Awareness
From a first-person view, trainees identify different drugs and experience the visual and auditory changes caused by drug use.
Typhoon Preparedness
When a typhoon approaches, trainees follow weather updates, avoid going out, store food and water, and learn about accidents that happen outdoors.
Fall on the Stairs
Rushing downstairs after work to go and play ball, a worker trips and breaks his hand.
No modules found for
Need modules combined for your industry?
Tell us your industry, trainees and budget, and an advisor will recommend a module combination and send demo materials.
